home

Home

help

Help

where-to-buy

Where to Buy

company

Company

home2

Home2

about-us

About Us

contact-us

Contact Us

services

all-products

Products

fpga-boards

FPGA Boards

spartan-6-fpga-boards

Spartan 6 FPGA Boards

spartan-3-fpga-boards

Spartan 3 FPGA Boards

artix-7-fpga-boards

Artix 7 FPGA Boards

jtag-programming-cables

JTAG Programming Cables

jtag-hs3

JTAG HS3

jtag-hs2

JTAG HS2

jtah-smt2

JTAH SMT2

test-and-mesurement-products

Test And Mesurement Products

siglent-products

SIglent Products

usb-scopes-instrume

USB Scopes, Instrume

relay-modules

Relay Modules

usb-relay-modules

USB Relay Modules

ethernet-relay-module

Ethernet Relay Module

Footer

Header

The Digilent Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design, build, and test analog and digital circuits of all types. Built around a large solderless breadboard, the EE board includes a 4-channel mixed-signal USB oscilloscope, waveform generator, variable power supply, voltmeter, reference voltage generator, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires. 

Designed for daily use and intended for every student to own, the EE board combines everything needed to design and test circuits in a single all-in-one device. Even in introductory classes, students can build, test, and analyze real circuit designs as a part of every homework assignment. No more once a week labs; now every student can complete designs in virtually any setting - any residence can be a complete, 24-hour design studio!

The EE board is powered by the free, WaveForms software (now Windows, Mac, and Linux compatible) that makes it easy to acquire, store, analyze, produce, and reuse analog and digital signals. WaveForms runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time. 

WaveForms data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student labs/project reports can be completed using standard office tools, and submitted electronically. 

Features:
4-channel, 40MS/s, 100MHz, Oscilloscopes
2-channel, 40MS/s, 20MHz, Arbitrary Waveform Generator
2-channel, ± 9V, 1.5A, variable power supply
1-channel, 3.3/5V, 2A, fixed power supply
4-channel voltmeter
2 programmable reference voltages
Can connect all instruments to circuits built on the solderless breadboard using simple jumper wires
32 digital signals that can be configured as:
32-channel logic analyzer
32-channel pattern generator
Discrete digital I/Os (buttons, switches, LEDs, etc.)

Electronics Explorer: All-in-one USB Oscilloscope, Multimeter & Workstation

Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability.

Standard USBXITM interface, easily inserts into USBXITM housing to make up a combination instrument.

USB2.0 interface, no external power source required, easy to use.

Be suitable for notebook computer, product line maintenance, be used easily on business.

Dimensions (mm):205(L) x120(W) x35(H), be carried easily.High performance, 

250MS/s real-time sampling, 20MHz-80MHz bandwidth.

Operating System: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.

23 measurement functions, PASS/FAIL Check, be suitable for technical application.

Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot.

Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file.

FFTOne 

computer can connect many DSO, extend channel easily.Labview\VB\VC Second Design instance.

DSO 6022BE

Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability.

Standard USBXITM interface, easily inserts into USBXITM housing to make up a combination instrument.

USB2.0 interface, no external power source required, easy to use.

Be suitable for notebook computer, product line maintenance, be used easily on business.

Dimensions (mm):205(L) x120(W) x35(H), be carried easily.

High performance, 48MS/s real-time sampling, 20MHz bandwidth.

16Channels Logic Analyzer, 10MHz Bandwidth;

Operating System: Windows 7, Windows 8, Windows 10.

23 measurement functions, PASS/FAIL Check, be suitable for technical application.

Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot.

Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file.

FFT

One computer can connect many DSO, extend channel easily.

Labview\VB\VC Second Design instance. 


Hantek 6022BL

Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab. The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs. Driven by the free WaveForms (Mac, Linux and Windows Compatible) software, Analog Discovery 2 can be configured to work as any one of several traditional instruments including an Oscilloscope, Waveform Generator, Power Supply, Voltmeter, Data Logger, Logic Analyzer, Pattern Generator, Static I/O, Spectrum Analyzer, Network Analyzer, Impedance Analyzer, and Protocol Analyzer. 

Features:
Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals
16-channel digital logic analyzer (3.3V CMOS and 1.8V or 5V tolerant, 100MS/s)
Digital Bus Analyzers (SPI, I²C, UART, Parallel)
16-channel pattern generator (3.3V CMOS, 100MS/s)
16-channel virtual digital I/O including buttons, switches, and LEDs – perfect for logic training applications
Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS)
Single channel voltmeter (AC, DC, ±25V)
Network Analyzer – Bode, Nyquist, Nichols transfer diagrams of a circuit. Range: 1Hz to 10MHz
Spectrum Analyzer – power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.)
Data Logger - Exportable data and plot functionality
Impedance Analyzer - Capacitive and Inductive Elements 
Protocol Analyzer - SPI, I2C, UART, and CAN
Two programmable power supplies (0…+5V , 0…-5V). The maximum available output current and power depend on the Analog Discovery 2 powering choice:
500mW total when powered through USB. (Each supply can provide between 0mW and 500mW so long as the total does not exceed 500mW.)
2.1W max for each supply when powered by an auxiliary supply.
700mA maximum current for each supply.
An available Software Development Kit for programming with Python and C++, and a toolkit for programming with LabVIEW.
MATLAB support for the Data Acquisition Toolbox
For more information check out AnalogDiscovery.com
Note for Educators concerned with compatibility with existing course materials: The Analog Discovery 2 is backwards compatible with WaveForms Classic. For more questions about this compatibility please visit our Educator Forum. 

What's Included:
Analog Discovery 2
One regular-sized project box (without sticker sheet)
One USB A to micro B programming cable
One 2x15 flywire signal cable assembly
5-pack of 6-pin male headers
One ferrite cable snap-on

ANALOG DISCOVERY 2

Product Overview

Siglent’s SDS1000CFL family of scopes offer faster sampling rates and higher bandwidths than other Siglent SDS1000 families of scopes. The CFL’s provide up to four channels with an external trigger input channel and bandwidths up to 300 MHz. With a set of separate vertical controls for each input channel, you don’t need to worry about accidentally modifying the wrong trace. No more switching between channels as found in some other 2 and 4 channel oscilloscopes. Powerful triggering and analysis capabilities make it easy to capture and analyze waveforms, greatly improving the test efficiency.


Key Features

◆ 7” Color TFT LCD display

◆ 2/4 channels, Bandwidth: 70MHz-300 MHz

◆ Single channel real-time sampling rate is: 2GSa/s, Equivalent sampling rate is 50GSa/s

◆ Memory depth: 24Kpts

◆ Trigger types: Edge, Pulse, Video, Slope and Alternative

◆ Powerful Digital Filter function and Waveform recorder function

◆ Auto measurement of thirty two parameters

◆ 2 / 4 groups’ reference waveforms. 20 groups of captured waveforms and 20 groups of setups. Internal save/recall function and USB flash drive save/recall function.

◆ Cursor types: Manual mode, Track mode and Auto mode

◆ Channel waveform and its FFT waveform display on split screen or full screen

◆ Four Screen display styles: Classical, Modern, Tradition, Succinct

◆ Multiple Language User Interface

◆ Supports built-in online help system

◆ Standard interfaces: Dual USB Host; USB Device; LAN Port; Pass/Fai Out

Ordering Information
Product Model
SDS1304CFL, 300MHz, 4 channel
SDS1302CFL, 300MHz, 2 channel

SDS1204CFL, 200MHz, 4 channel
SDS1202CFL, 200MHz, 2 channel

SDS1104CFL, 100MHz, 4 channel
SDS1102CFL, 100MHz, 2 channel

SDS1074CFL, 70MHz, 4 channel
SDS1072CFL, 70MHz, 2 channel

Standard Accessories
A USB cable
A QuickStart Guide
A product qualification certificate
Warranty Card
A power cord designed for the instrument and authorized by local country
1：1/10：1 probe（Consistent with the number of channels you bought）
Optional Accessories
Isolated channel optional accessories
SDS1000CFL series oscilloscope portable bag
The Cost is for two channel 100Mhz. for any other model please contact us for further information.


SDS1000CFL Series Digital Storage Oscilloscopes

DSO 5000P SERIES     Bandwidth:70-200MHz;