home

Home

help

Help

where-to-buy

Where to Buy

company

Company

home2

Home2

about-us

About Us

contact-us

Contact Us

services

all-products

Products

fpga-boards

FPGA Boards

spartan-6-fpga-boards

Spartan 6 FPGA Boards

spartan-3-fpga-boards

Spartan 3 FPGA Boards

artix-7-fpga-boards

Artix 7 FPGA Boards

jtag-programming-cables

JTAG Programming Cables

jtag-hs3

JTAG HS3

jtag-hs2

JTAG HS2

jtah-smt2

JTAH SMT2

test-and-mesurement-products

Test And Mesurement Products

siglent-products

SIglent Products

usb-scopes-instrume

USB Scopes, Instrume

relay-modules

Relay Modules

usb-relay-modules

USB Relay Modules

ethernet-relay-module

Ethernet Relay Module

Footer

Header

MIMAS V2 is a feature packed yet low cost FPGA Development board featuring Xilinx Spartan-6 FPGA. MIMAS V2 is specially designed for experimenting and learning system design with FPGAs. This development board features SPARTAN XC6SLX9 CSG324 FPGA with onboard 512Mb DDR SDRAM. The USB 2.0 interface provides fast and easy configuration download to the on-board SPI flash. No need to buy an expensive programmer or special downloader cable to download the bit stream to the board.

Spartan 6 FPGA Board with DDR RAM

Product Title

Mimas is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA. Mimas is specially designed for experimenting and learning system design with FPGAs. This development board features Xilinx XC6SLX9 TQG144 FPGA with maximum 70 user IOs. The USB 2.0 interface provides fast and easy configuration download to the on-board SPI flash. You don’t need a programmer or special downloader cable to download the bit stream to the board.

Features

FPGA: Spartan-6 XC6SLX9 in TQG144 package
Flash memory: 16 Mb SPI flash memory (M25P16)
100MHz CMOS oscillator
USB 2.0 interface for On-board flash programming
FPGA configuration via JTAG and USB
8 LEDs and four switches for user defined purposes
70 IOs for user defined purposes
On-board voltage regulators for single power rail operation
Applications

Product Prototype Development
Signal Processing
Wired and Wireless Communications

MIMAS Spartan 6 FPGA Development Board

Product Description
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.

Note: 
The only difference between the Cmod A7-15T and Cmod A7-35T are the capabilities of the FPGA found on the board. They compare as follows:

 	Cmod A7-15T	Cmod A7-35T
FPGA part	XC7A15T-1CPG236C	XC7A35T-1CPG236C
1 MSPS On-chip ADC	Yes	Yes
Programming options	Quad-SPI Flash/JTAG	Quad-SPI Flash/JTAG
Look-up Tables (LUTs)	10,400	20,800
Flip-flops	20,800	41,600
Block RAM	112.5 KB	225 KB
Clock Management Tiles	5	5
Features:
System Features
512KB SRAM with an 8-bit bus and 8ns access times
4MB Quad-SPI Flash
USB-JTAG Programming Circuitry
Powered from USB or external 3.3-5.5V supply connected to DIP pins
System Connectivity
USB-UART bridge
Interaction and Sensory Devices
2 LEDs
1 RGB LED
2 Push Buttons
Expansion Connectors
48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
One Pmod connector with 8 Digital I/O

Cmod A7: Breadboardable Artix-7 FPGA Module

The Nexys A7 is the new name for our popular Nexys 4 DDR board, now available in two FPGA densities! Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys A7 is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. The Artix-7 FPGA is optimized for high-performance logic, and offers more capacity, higher performance, and more resources than earlier designs. With its large, high-capacity FPGA and collection of USB, Ethernet, and other ports, the Nexys A7 can host designs ranging from introductory combinational circuits to powerful embedded processors. Several built-in peripherals, including an accelerometer, a temperature sensor, MEMs digital microphone, speaker amplifier, and plenty of I/O devices allow the Nexys A7 to be used for a wide range of designs without needing any other components. 

The Nexys A7-100T is compatible with Xilinx's Vivado® Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. Xilinx ISE has been discontinued in favor of Vivado® Design Suite.

The Nexys A7-50T variant is compatible only with Vivado® Design Suite.

Xilinx offers free WebPACK™ versions of these toolsets, so designs can be implemented at no additional cost.

The Nexys A7 is not supported by the Digilent Adept Utility.
Features:
Product Variant	A7-100T	A7-50T
Artix-7 Part	XC7A100T-1CSG324C 	XC7A50T-1CSG324C
Logic Slices	15,850 (4 6-input LUTs & 8 flip flops each)	8,150 (4 6-input LUTs & 8 Flip flops each)
Block RAM	4,860 Kbits	2,700 Kbits
Clock Tiles	6 (each with PLL) 	5 (each with PLL) 
DSP Slices	240	120
Internal Clock	450 MHz+	450 MHz+
DDR2 Memory	128MiB	128MiB
Cellular RAM	16MB	16MB
Specifications:
Programming: Vivado Design Suite as well as the ISE toolset

Xilinx Artix-7 FPGA XC7A100T-1CSG324C or XC7A50T-1CSG324C
15,850 logic slices, each with four 6-input LUTs and 8 flip-flops (8,150 logic slices for the A7-50T)
4,860 Kbits of fast block RAM  (2,700 Kbits for the A7-50T)
Six clock management tiles, each with phase-locked loop (PLL) (5 clock management tiles for the A7-50T)
240 DSP slices (120 DSP slices for A7-50T)
Internal clock speeds exceeding 450 MHz 
On-chip analog-to-digital converter (XADC) 
128 MiB DDR2 
Serial Flash 
Digilent USB-JTAG port for FPGA programming and communication 
microSD card connector 
Ships with rugged plastic case and USB cable
USB-UART Bridge 
10/100 Ethernet PHY 
PWM audio output 
3-axis accelerometer 
16 user switches 
16 user LEDs
Two tri-color LEDs 
PDM microphone
Temperature sensor 
Two 4-digit 7-segment displays 
USB HID Host for mice, keyboards and memory sticks 
Pmod for XADC signals 
12-bit VGA output 
Four Pmod ports
 

What's Included:
Nexys A7 FPGA: choose from 100T or 50T variant
Digilent custom hardshell plastic case with protective foam
Micro USB cable

Nexys A7: FPGA Trainer Board 

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes an incredibly flexible processing platform, capable of adapting to whatever your project requires. Unlike other single board computers, Arty isn't bound to a single set of processing peripherals; one moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers. Additionally, with the universally popular expansion headers (Arduino™ R3 Headers and our Pmod™ headers), Arty will become the most adaptable tool in your project tool box.

Features:
Xilinx Artix-35T FPGA:
33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops);
1,800 Kbits of fast block RAM;
Five clock management tiles, each with a phase-locked loop (PLL);
90 DSP slices;
Internal clock speeds exceeding 450MHz;
On-chip analog-to-digital converter (XADC).
Programmable over JTAG and Quad-SPI Flash
System Features:
256MB DDR3L with a 16-bit bus @ 667MHz
16MB Quad-SPI Flash
USB-JTAG Programming circuitry (USB Micro cable required, NOT INCLUDED). 
Powered from USB or any 7V-15V source
System Connectivity:
10/100 Mbps Ethernet
USB-UART Bridge
Interaction and Sensory Devices
4 Switches
4 Buttons
1 Reset Button
4 LEDs
4 RGB LEDs
Expansion Connectors:
4 Pmod connectors
Arduino/chipKIT Shield connector

Arty Artix-7 FPGA: Development Board

The Basys 3 is an entry-level FPGA development board designed exclusively for Vivado Design Suite, featuring Xilinx Artix-7 FPGA architecture. Basys 3 is the newest addition to the popular Basys line of FPGA development boards, and is perfectly suited for students or beginners just getting started with FPGA technology. The Basys 3 includes the standard features found on all Basys boards: complete ready-to-use hardware, a large collection of on-board I/O devices, all required FPGA support circuits, a free version of development tools, and at a student-level price point. 
The Basys 3 does not ship with a USB cable. 

If you would like an evaluation board for academic purposes, you can apply for a donation through the Xilinx University Program. 

Digilent provides students with a better representation of professional-level engineering by greatly improving the Basys feature sets. These improvements include: 

More I/O: 
Double the user interface switches, double the number of onboard outputs, upgraded the number of external ports (moving from 6-pin single-row Pmods to 12-pin double-row Pmods) and included for the first time on a Basys class device a USB-UART bridge. 

Modern Architecture and Modern Programming Challenges: 
Due to the migration from the Spartan-3E family to the Artix-7 class of device, the Basys 3 offers a substantial increase in hardware capabilities. With the new Artix FPGA comes 15X the logic cells (from 2,160 to 33,280) and the upgrade from multipliers to true DSP slices. It also adds over 26X the amount of RAM. 

Industry's First SoC Strength Design Suite: 

The most significant change to the Basys 3 is the upgrade to Xilinx Vivado Design Suite (WebPACK edition available for free download from Xilinx), the most modern design tool chain used by professional engineers worldwide. Compared to ISE®, Vivado offers an improved user experience and expanded capabilities. These capabilities include block-based IP integration (which can reduce development time up to 10x) and the Vivado Logic/Serial I/O analyzer*.  

Stats:
Device/IC: Xilinx Artix-7 FPGA (XC7A35T-1CPG236C)

Connector(s): 

USB A
USB micro-B
Four 12-pin Pmod ports
VGA
Programming: Designed exclusively for the Vivado Design Suite

Features:
Features the Xilinx Artix-7 FPGA: XC7A35T-1CPG236C
33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops) 
1,800 Kbits of fast block RAM 
Five clock management tiles, each with a phase-locked loop (PLL)
90 DSP slices
Internal clock speeds exceeding 450 MHz
On-chip analog-to-digital converter (XADC)
Digilent USB-JTAG port for FPGA programming and communication
Designed Exclusively for Vivado Design Suite (Vivado Design Suite WebPACK edition can be downloaded for free from Xilinx). Expanded features are available through purchase of the Design Edition. 
Free WebPACK™ download for standard use.
Micro-B USB cable not included. 
Serial Flash 
USB-UART Bridge 
12-bit VGA output 
USB HID Host for mice, keyboards and memory sticks 
16 user switches 
16 user LEDs
5 user pushbuttons 
4-digit 7-segment display
4 Pmod ports: 3 Standard 12-pin Pmod ports, 1 dual purpose XADC signal / standard Pmod port
 

What's Included:
Basys 3 FPGA development board
Custom Digilent cardboard box with protective foam
The Basys 3 does not include a USB cable
Vivado Design Suite Voucher is not included. The free WebPACK edition is available for download from Xilinx.

Basys 3 Artix-7 FPGA Trainer Board

he Basys 2 FPGA development board is a circuit design and implementation platform for beginners to gain experience building real digital circuits. Built around a Xilinx® Spartan®-3E FPGA and an Atmel® AT90USB2 USB controller, the Basys 2 development board provides complete, ready-to-use hardware suitable for hosting circuits ranging from basic logic devices to complex controllers. A large collection of on-board I/O devices and all required FPGA support circuits are included, so countless designs can be created without the need for any other components. 

Four standard expansion connectors allow designs to grow beyond the Basys 2 board using breadboards, user-designed circuit boards, or Pmods (Pmods are inexpensive analog and digital I/O modules that offer A/D & D/A conversion, motor drivers, sensor inputs, and many other features). Signals on the 6-pin connectors are protected against ESD damage and short-circuits, ensuring a long operating life in any environment. The Basys 2 board works seamlessly with all versions of the Xilinx ISE® tools, including the free WebPACK™. It ships with a USB cable that provides power and a programming interface, so no other power supplies or programming cables are required. 
Features:
Xilinx Spartan-3E FPGA, 100K gates*
Linear Technology
Atmel
FPGA features 18-bit multipliers
72 Kbits of fast dual-port block RAM
300 MHz+ operation 
Requires Adept 2.0 or later for operation
XCF02 Platform Flash ROM that stores FPGA configurations indefinitely
User-settable oscillator frequency (25, 50, and 100 MHz), plus socket for a second oscillator 
Three on-board voltage regulators (1.2V, 2.5V, and 3.3V) that allow use of 3.5V-5.5V external supplies 
Ships with a mini USB cable that provides power and a programming interface
8 LEDs, 4 pushbuttons, 8 slide switches
4-digit seven-segment display
PS/2 port
8-bit VGA port
USB2 full-speed port for FPGA configuration and data transfers (using Adept 2.0 software available as a free download)
Four 6-pin headers for user I/Os, and attaching Digilent Pmod accessory circuit boards 

Basys 2 Spartan-3E FPGA Trainer Board

ELBERT V2 is a simple but versatile FPGA Learning/Development board featuring Xilinx Spartan 3A FPGA. An excellent choice for beginners and advance learners for experimenting and learning system design with FPGAs. This development board features Xilinx XC3S50A 144 pin FPGA with maximum 108 user IOs (Some IOs are dedicated for system and peripherals). USB2 interface provides fast and easy configuration download to the on board SPI flash. You don’t need a programmer or special downloader cable to download bit stream to Elbert. ELBERT V2 features a stable clock source which is derived from on board configuration controller. ELBERT V2 incorporates LEDs, switches and other peripherals for curious users to get started with “Hello World” program in a matter of minutes.  Academic pricing is available for students and faculty. 

 Board features

FPGA: Spartan XC3S50A in TQG144 package 
Flash memory: 16 Mb SPI flash memory (M25P16) 
USB 2.0 interface for On-board flash programming 
FPGA configuration via JTAG and USB 
8 LEDs ,Six Push Buttons and 8 way DIP switch for user defined application
VGA output 
Stereo audio out 
Micro SD Card Adapter 
Three Seven Segment Displays 
39 IOs for user defined purposes 
On-board voltage regulators for single power rail operation 
ROHS Complaint


Spartan 3A development Board

The Spartan®-3E Starter Board provides a powerful and highly advanced self-contained development platform for designs targeting the Spartan-3E FPGA from Xilinx®. It features a 500K gate Spartan-3E FPGA with a 32-bit RISC processor and DDR interfaces. 

The board also features a Xilinx Platform Flash, USB, and JTAG parallel programming interfaces with numerous FPGA configuration options via the onboard Intel® StrataFlash and STMicroelectronics® Serial Flash. The board is fully compatible with all versions of the Xilinx ISE® tools, including the free WebPACK™. The board ships with a power supply and USB cable for programming so designs can be implemented immediately with no hidden costs. The Spartan-3E Starter board is also compatible with the MicroBlaze™ Embedded Development Kit (EDK) and PicoBlaze™ from Xilinx. 

Note:
In order to program and communicate with the Spartan-3E Starter board, you must download and install the free Xilinx ISE WebPACK software.

For reference designs and documentation, please visit Xilinx's Spartan-3E support page. 

Stats:
Processor/IC: Xilinx Spartan-3E (500K gates) XC3S500E FPGA

Connector(s):

100-pin Hirose FX2 connector
Three 6-pin Pmod ports
DB15HD VGA
PS/2 keyboard
Two DB9 RS-232 connectors
RJ-45 Ethernet
16-pin header for optional LCD modules
SMA connector for high-speed clock input
Programming: JTAG programming via on-board USB2 port; JTAG & SPI Flash programming with parallel or USB JTAG cable; numerous additional configuration options

Features:
Xilinx Spartan-3E (500K gates) XC3S500E FPGA
Xilinx XCF04 Platform Flash for storing FPGA configurations
Texas Instruments TPS75003 Triple-Supply Power Management IC 
JTAG & SPI Flash programming with parallel or USB JTAG cable 
Linear Technology Power Supplies
64MB Micron® DDR SDRAM 
16MB Numonyx StrataFlash™ 
2MB ST Microelectronics Serial Flash
JTAG programming via on-board USB2 port 
Numerous additional configuration options 
SMSC LAN83C185 Ethernet PHY
PS/2 keyboard 
RJ-45 Ethernet  
16-pin header for optional LCD modules 
SMA connector for high-speed clock input 
Two DB9 RS-232 connectors 
100-pin Hirose FX2 connector 
Three 6-pin Pmod ports
DB15HD VGA 
 

What's
Included:

Spartan-3E Starter Board
Custom Digilent cardboard box with protective foam
USB A to B cable
External power supply

Spartan 3E starter kit