Cmod A7: Breadboardable Artix-7 FPGA Module

₹ 7,200.00

Product Description The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems. Note: The only difference between the Cmod A7-15T and Cmod A7-35T are the capabilities of the FPGA found on the board. They compare as follows: Cmod A7-15T Cmod A7-35T FPGA part XC7A15T-1CPG236C XC7A35T-1CPG236C 1 MSPS On-chip ADC Yes Yes Programming options Quad-SPI Flash/JTAG Quad-SPI Flash/JTAG Look-up Tables (LUTs) 10,400 20,800 Flip-flops 20,800 41,600 Block RAM 112.5 KB 225 KB Clock Management Tiles 5 5 Features: System Features 512KB SRAM with an 8-bit bus and 8ns access times 4MB Quad-SPI Flash USB-JTAG Programming Circuitry Powered from USB or external 3.3-5.5V supply connected to DIP pins System Connectivity USB-UART bridge Interaction and Sensory Devices 2 LEDs 1 RGB LED 2 Push Buttons Expansion Connectors 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V) One Pmod connector with 8 Digital I/O