Name: Basys MX3 PIC32MX Trainer Board
SKU: BasysMX3
Price: 11500 INR
Availability: InStock

home

Home

help

Help

where-to-buy

Where to Buy

company

Company

home2

Home2

about-us

About Us

contact-us

Contact Us

services

all-products

Products

fpga-boards

FPGA Boards

spartan-6-fpga-boards

Spartan 6 FPGA Boards

spartan-3-fpga-boards

Spartan 3 FPGA Boards

artix-7-fpga-boards

Artix 7 FPGA Boards

jtag-programming-cables

JTAG Programming Cables

jtag-hs3

JTAG HS3

jtag-hs2

JTAG HS2

jtah-smt2

JTAH SMT2

test-and-mesurement-products

Test And Mesurement Products

siglent-products

SIglent Products

usb-scopes-instrume

USB Scopes, Instrume

relay-modules

Relay Modules

usb-relay-modules

USB Relay Modules

ethernet-relay-module

Ethernet Relay Module

Footer

Header

The Basys MX3 is a true MCU trainer board designed from the ground up around the teaching experience. Featuring the PIC32MX370 from Microchip plus an exhaustive set of peripherals, students gain exposure to a wide range of embedded systems related concepts while using a professional grade tool set. Accompanied by free and open-source coursework, including 7 in-depth teaching units and 15 complete labs, the Basys MX3 is a versatile MCU trainer board ideal for teaching introductory embedded systems courses.
Processor/IC: Microchip PIC32MX370F512L Microcontroller
MIPS32® M4K® core runs up to 96 MHz using onboard 8 MHz oscillator
512 KB of Program Flash Memory
12KB of Boot Flash Memory
128 KB of SRAM
Four Direct Memory Access (DMA) Modules
Two SPI, Two I²C, and Five UART serial interfaces
Parallel Master Port (PMP) for graphics interfaces
Five 16-bit Timers/Counters
Five Input Capture Modules
Five Output Compare Modules
85 I/O pins
54 pins support Peripheral Pin Select (PPS) for function remapping
Software
Designed for use with MPLAB X IDE
System Features
4 MB SPI Flash
Onboard USB UART (USB Micro cable required, NOT INCLUDED)
Supports baud rates up to 1.25 MBaud
Powered from USB or 5 V external power source
Standard barrel jack for 2.0 mm internal-diameter plug
No jumper select required
System Connectivity
USB-UART Bridge
Interaction and Sensory Devices
8 Slide Switches
5 Buttons
1 Reset Button
8 LEDs
1 RGB LED
Onboard 3-axis, 12-bit accelerometer
Programmable Motion Detection
I2C Interface with Programmable Interrupt
Onboard FIR-compatible IrDA Module
Built-in Remote Control Transmission Function
Supports speeds up to 4 Mbps
Onboard Audio Input and Output
MEMS Microphone with Adjustable Gain
Thumbwheel potentiometer for adjusting mic volume
PWM driven mono audio output with onboard speaker
Thumbwheel potentiometer for adjusting speaker volume
3.5 mm jack for line out connection to external amplifier/speaker system
Onboard Displays
2x16 LCD Character Display with LED backlight
4-Digit Seven Segment Display with red LEDs
Motor Control
Onboard Dual H-Bridge Motor Driver
Supports up to two 1.5 A Brushed DC Motors or one stepper motor
Supports motor voltages up to 11 V
Terminal block provides easy connection to motors
2 Servo Connectors
Analog Input Control (AIC)
Thumbwheel potentiometer for varying analog input between 0 to 3.3 V
Two wire loops for ground and AIC
Expansion Connectors
Two 2×6 Pmod host ports
SPI, UART, GPIO, PWM, analog in
Terminal block for two DC motors or one stepper motor
Two R/C servo connectors
One I²C connector
Debugging
On-board 30-pin Analog Discovery 2 connector
On-board USB programmer/debugger
Program/debug the PIC32MX370 directly from MPLAB / MPLABX
Support
7 free and open-source teaching units complete with 15 labs
Enough content to support one to two semesters of undergraduate embedded systems coursework

Basys MX3 PIC32MX Trainer Board